All public logs

Combined display of all available logs of makernexuswiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 10:11, 10 September 2024 Jschrempp talk contribs created page Upholstery Repair (Created page with "== Replacing Foam == Foam can be about 4 inches thick and rarely comes in the exact size you need. There are several ways to cut and trim it. The foam is often polyurethane so you do NOT want to use a hot wire because of the fumes and also because it melts into stickiness rather than basically evaporating like polystyrene foam. Hotwire cutters are for polystyrene foam. Professionals often use an old fashioned electric carving knives. It is faster and easier than a sh...")
• 10:02, 10 September 2024 Jschrempp talk contribs created page Textiles (Created page with "This is a jumping off page for general textiles tips and tricks. * Upholstery Foam")
• 15:19, 2 September 2024 Jschrempp talk contribs created page Food stuff (Created page with "Making can be done in the kitchen as well! == The Science of Cooking == Resources that tell you what's really going on in your pots and pans. * On Food and Cooking by Harold McGee. This is a a bible of all the science behind every kind of food you can imagine. This is a tour de force that every food hacker should have. * Modernist Cuisine and Modernist Cuisine at Home by Nathan Myhrvold, et al. A billionaire hires top chefs and a warehouse of top end equipment to fig...")
• 21:28, 17 August 2024 Jschrempp talk contribs changed group membership for Amylee from (none) to administrator (she's troubleshooting the poor formatting on iPhones)
• 10:55, 17 August 2024 Jschrempp talk contribs created page MediaWiki:Requestaccount-text (Created page with "'''Complete and submit the following form to request a user account'''. '''We get A LOT of spam requests, so please alert info@ to get your account request approved.''' Make sure that you first read the [[{{MediaWiki:Requestaccount-page}}|Terms of Service]] before requesting an account. Once the account is approved, you will be emailed a notification message and the account will be usable at login.")
• 10:43, 17 August 2024 User account Amylee talk contribs was created by Jschrempp talk contribs and password was sent by email
• 10:19, 19 May 2024 User account AndrewP talk contribs was created by Jschrempp talk contribs and password was sent by email (Sorry this confirmation took so long! Welcome to the wiki!)
• 21:16, 15 May 2024 Jschrempp talk contribs moved page Donations to In-Kind Donations
• 00:50, 30 December 2023 Jschrempp talk contribs created page Sawgrass SG1000 Sublimation Printer (Created page with "Prints onto special paper and that is applied to a surface with heat. Fabrics and objects that lay flat can use the heat press. Shaped objects need a compression sleeve and the oven. This process will print well on dark fabrics. A good source of supplies: [https://www.heattransferwarehouse.com/ Heat Transfer Warehouse]. They are not crazy expensive, but not cheap.")
• 15:25, 28 December 2023 Jschrempp talk contribs uploaded File:Rotating laser joint.png (example of a rotating joint with a stop point)
• 15:25, 28 December 2023 Jschrempp talk contribs created page File:Rotating laser joint.png (example of a rotating joint with a stop point)
• 14:09, 21 December 2023 User account Ally.kraus talk contribs was created by Jschrempp talk contribs and password was sent by email
• 15:11, 11 December 2023 Jschrempp talk contribs blocked 120.11.91.185 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
• 15:07, 11 December 2023 User account Allyk talk contribs was created by Jschrempp talk contribs and password was sent by email
• 20:53, 6 November 2023 Jschrempp talk contribs created page Advice: Wood Glue Ups (Created page with "= One man's opinions = [https://www.youtube.com/watch?v=Wmw5rayNIV4 This video clip] has some good general tips to start with. Don’t over-clamp the joint. I’m right-handed, so I use the left-hand cue i.e. the turn the clamp with my left hand just enough. That gives me a good feel for the tightening. There is a lot of gluing in an end grain cutting board. So, make the clean up easy by applying just the right amount of glue (as above). If there is squeeze out, resist...")
• 10:45, 4 November 2023 Jschrempp talk contribs created page Drum sander tips (Created page with "In the shared shop environment you have to assume every tool is slightly out of adjustment unless you adjust it as you are starting your job, and assume it will be out of adjustment the next day you need to use that tool. The drum sander should be adjusted slightly tighter on the motor side. On a project desiring high precision and parallel you should make the adjustment for your job and hopefully put it back when you are done. For jobs narrower than 16” not req...")
• 15:18, 3 November 2023 Jschrempp talk contribs created page Wood preparation tips 1 (Created page with "= Precision is key = 400px|right|I recently finished an end grain cutting board that I recently finished. In response to a couple of questions from other members who saw me in the process of building it, here are some build notes that may be of help. I am not going to describe how to build edge grain cutting boards here - there are enough videos on YT that describe how to do that. Instead, I would like to focus on “precision” since even t...")
• 15:00, 3 November 2023 Jschrempp talk contribs uploaded File:CuttingBoard.jpg (Precision end grain cutting board)
• 15:00, 3 November 2023 Jschrempp talk contribs created page File:CuttingBoard.jpg (Precision end grain cutting board)
• 10:44, 28 October 2023 Jschrempp talk contribs changed group membership for Kellybyrd from administrator to (none)
• 10:44, 28 October 2023 Jschrempp talk contribs changed group membership for DanR from bureaucrat and administrator to (none)
• 10:44, 28 October 2023 Jschrempp talk contribs changed group membership for Ajohnson from administrator to (none)
• 19:53, 19 September 2023 Jschrempp talk contribs created page Changing Barudan Frame (Created page with "Q: I have some material that does not fit into the standard textile frames - I saw some yellow metal frames that look like they work, but no idea how to get them into the machine. :A: Undo the 4 black turn knobs. Slide the pantograph frame out. Slide the clamp frame in. Tighten the 2 centre black knobs. Make sure before you tighten the knobs that the frame is sitting right down and the two little buttons are poking through the holes by the knobs. Reverse the procedure...")
• 19:53, 19 September 2023 Jschrempp talk contribs uploaded File:Barudan knob 6.jpg (knob 6)
• 19:53, 19 September 2023 Jschrempp talk contribs created page File:Barudan knob 6.jpg (knob 6)
• 19:52, 19 September 2023 Jschrempp talk contribs uploaded File:Barudan knob 5.jpg (knob 5)
• 19:52, 19 September 2023 Jschrempp talk contribs created page File:Barudan knob 5.jpg (knob 5)
• 19:51, 19 September 2023 Jschrempp talk contribs uploaded File:Barudan knob 4.jpg (knob 4)
• 19:51, 19 September 2023 Jschrempp talk contribs created page File:Barudan knob 4.jpg (knob 4)
• 19:50, 19 September 2023 Jschrempp talk contribs uploaded File:Barudan knob 3.jpg (knob 3)
• 19:50, 19 September 2023 Jschrempp talk contribs created page File:Barudan knob 3.jpg (knob 3)
• 19:49, 19 September 2023 Jschrempp talk contribs uploaded File:Barudan knob 2.jpg (knob 2)
• 19:49, 19 September 2023 Jschrempp talk contribs created page File:Barudan knob 2.jpg (knob 2)
• 19:49, 19 September 2023 Jschrempp talk contribs uploaded File:Barudan knob 1.jpg (knob 1)
• 19:49, 19 September 2023 Jschrempp talk contribs created page File:Barudan knob 1.jpg (knob 1)
• 19:47, 19 September 2023 Jschrempp talk contribs uploaded File:Barudan- 9 17 2023 , 2 48 58 PM.jpg (Front view showing 2 release knobs)
• 19:47, 19 September 2023 Jschrempp talk contribs created page File:Barudan- 9 17 2023 , 2 48 58 PM.jpg (Front view showing 2 release knobs)
• 10:52, 7 September 2023 Jschrempp talk contribs moved page BOSS 100W Laser Cutter, BossLaser LS2440 to BOSS Class: 100W Laser Cutter, BossLaser LS2440 (To make it clear that this is a BOSS class page)
• 10:50, 7 September 2023 Jschrempp talk contribs created page Red Laser (Created page with "== Specifics == * Chinese parts, no make or model. * 100 watt * bed size: 22" x 26" * vents to a filter. MDF, leather, other smokey/smelly materials are not allowed. == Training == * links to BOSS class documents in the MN Members Team Drive * links to specific BossLaser videos * Information common to all lasers == Tips / Tricks specific to the Helix == * Using Lightburn at home ** select "Ruida" for controller, "Serial/USB", name it, set appropri...")
• 10:48, 7 September 2023 Jschrempp talk contribs created page BossLaser LS2440 (Created page with "== Specifics == * 100 watt * 24" x 40" bed ** BOSS physical working range: 24" x 39.0". Lightburn constraint (or maybe BOSS software): about 24"x36". Maximum sheet size that can be placed in the enclosure (overlapping the actual bed: bigger than 24" and bigger than 40", but not exactly sure and your positioning of a sheet that size requires planning. * vents to a filter. No MDF, leather, or other smokey/smelly materials. * based on testing by a member, the kerf is 0...")
• 10:44, 7 September 2023 Jschrempp talk contribs created page Epilog Helix (Created page with "== Specifics == * 45 Watt * 18" x 24" bed * vents to a filter. No MDF, leather, or other smokey/smelly materials. * on long term loan to MN == Training == * links to BOSS class documents in the MN Members Team Drive * links to specific BossLaser videos * Information common to all lasers == Tips / Tricks specific to the Helix == == Documentation == * links to manufactures documents * MN asset page")
• 19:18, 29 August 2023 Jschrempp talk contribs created page Amilia Migration Tips (Created page with "These are tips that might help a member moving to Amilia. Q: I'm trying to buy a membership using my phone and it asks me to pick a person, but there are no persons? :A: That pop up box will scroll. Use a finger and scroll up to see your name. That is an unfortunate user interface glitch. Q: My membership just renewed. Why should I pay again in Amilia right now? :A: We do not want you double charge you! When you buy your membership in Amilia we will credit your Amilia...")
• 14:35, 28 July 2023 Jschrempp talk contribs created page Donations (Created page with "Thank you for thinking of Maker Nexus. We appreciate it. As you can imagine, we get a lot of donations of used equipment, tools, and supplies. A lot of our makerspace was built up this way and we love it. At the same time, we have reached the point where we have to be more selective about the donations we accept. We have limited storage space, and it's pretty full. We also have to be careful about the type of equipment we take. Equipment and tools have to be sturdy e...")
• 14:19, 12 July 2023 Jschrempp talk contribs moved page Ace Monster Toys to Ace Makerspace
• 00:50, 7 July 2023 Jschrempp talk contribs uploaded File:Lightburn Rotary Setup annotated.png
• 00:50, 7 July 2023 Jschrempp talk contribs created page File:Lightburn Rotary Setup annotated.png
• 00:45, 7 July 2023 Jschrempp talk contribs created page BossLaser Tips and Tricks (Created page with "Q: I have issues with the y-axis being out of scale, and the gantry won't travel past about halfway across the bed. :A: This is a common problem caused by failing to disable the rotary attachment feature in Lightburn while the software still has an active connection to the powered-on laser. You likely remember from your class that the laser must be powered off any time you are connecting or disconnecting the y-axis connector with the rotary attachment. But when you tur...")
• 14:11, 4 July 2023 Jschrempp talk contribs created page Long Arm Quilter (Created page with "== Description == '''Important Info''': Neither the bobbin case nor the needles from the Consew (walking foot) fit any other machine. Likewise, neither the bobbin case nor the needles from the long arm fit any other machine. The long arm uses 16/100 needles. The easiest way to identify the long arm bobbin case vs. Consew (they both take size M bobbins) is that with the needle port (large opening at the top of the bobbin case) at the very top, the latching lever on the l...")
• 02:02, 27 June 2023 Jschrempp talk contribs changed group membership for KellyY from (none) to administrator
• 01:53, 26 June 2023 Jschrempp talk contribs changed group membership for HaleyM from (none) to administrator (temporary, until 02:53, 26 December 2023) (edit the MN page)