User contributions for Jschrempp

19:5319:53, 6 November 2023 diff hist +6,503‎ N Advice: Wood Glue Ups ‎ Created page with "= One man's opinions = [https://www.youtube.com/watch?v=Wmw5rayNIV4 This video clip] has some good general tips to start with. Don’t over-clamp the joint. I’m right-handed, so I use the left-hand cue i.e. the turn the clamp with my left hand just enough. That gives me a good feel for the tightening. There is a lot of gluing in an end grain cutting board. So, make the clean up easy by applying just the right amount of glue (as above). If there is squeeze out, resist..." current
10:1710:17, 6 November 2023 diff hist +369‎ ShopBot tips ‎No edit summary current
10:0910:09, 6 November 2023 diff hist +133‎ Interesting Projects ‎No edit summary current
10:0710:07, 6 November 2023 diff hist +53‎ Interesting Projects ‎No edit summary

09:4609:46, 4 November 2023 diff hist +23‎ Woodshop ‎ →‎Sanding
09:4509:45, 4 November 2023 diff hist +2,609‎ N Drum sander tips ‎ Created page with "In the shared shop environment you have to assume every tool is slightly out of adjustment unless you adjust it as you are starting your job, and assume it will be out of adjustment the next day you need to use that tool. The drum sander should be adjusted slightly tighter on the motor side. On a project desiring high precision and parallel you should make the adjustment for your job and hopefully put it back when you are done. For jobs narrower than 16” not req..." current
09:3809:38, 4 November 2023 diff hist +67‎ Woodshop ‎ →‎Misc

15:5715:57, 3 November 2023 diff hist +804‎ Wood preparation tips 1 ‎ →‎Precision is key current
14:1814:18, 3 November 2023 diff hist +4,500‎ N Wood preparation tips 1 ‎ Created page with "= Precision is key = 400px|right|I recently finished an end grain cutting board that I recently finished. In response to a couple of questions from other members who saw me in the process of building it, here are some build notes that may be of help. I am not going to describe how to build edge grain cutting boards here - there are enough videos on YT that describe how to do that. Instead, I would like to focus on “precision” since even t..."
14:0014:00, 3 November 2023 diff hist +47‎ N File:CuttingBoard.jpg ‎ Precision end grain cutting board current

18:5718:57, 19 September 2023 diff hist +55‎ Barudan BEVT Elite Pro II 15-Thread Embroidery Machine ‎ →‎Thread Breaking
18:5518:55, 19 September 2023 diff hist +50‎ Changing Barudan Frame ‎No edit summary current
18:5318:53, 19 September 2023 diff hist +818‎ N Changing Barudan Frame ‎ Created page with "Q: I have some material that does not fit into the standard textile frames - I saw some yellow metal frames that look like they work, but no idea how to get them into the machine. :A: Undo the 4 black turn knobs. Slide the pantograph frame out. Slide the clamp frame in. Tighten the 2 centre black knobs. Make sure before you tighten the knobs that the frame is sitting right down and the two little buttons are poking through the holes by the knobs. Reverse the procedure..."
18:5318:53, 19 September 2023 diff hist +20‎ N File:Barudan knob 6.jpg ‎ knob 6 current
18:5218:52, 19 September 2023 diff hist +20‎ N File:Barudan knob 5.jpg ‎ knob 5 current
18:5118:51, 19 September 2023 diff hist +20‎ N File:Barudan knob 4.jpg ‎ knob 4 current
18:5018:50, 19 September 2023 diff hist +20‎ N File:Barudan knob 3.jpg ‎ knob 3 current

Navigation menu