|
|
| Line 1: |
Line 1: |
| == Laser Cutters Reference == | | == Laser Cutters Reference == |
| * [[Laser Cutter|Reference material]] | | * [[Laser Cutter|Reference material]] |
| | | * [[Epilog Helix]] |
| ==Epilog Helix 45w==
| | * [[BossLaser LS2440]] |
| * 45 Watt
| | * [[Red Laser]] |
| * 18" x 24" bed
| |
| * vents to a filter. No MDF, leather, or other smokey/smelly materials.
| |
| * on long term loan to MN
| |
| | |
| == BossLaser LS2440 100w==
| |
| * 100 watt | |
| * 24" x 40" bed
| |
| ** BOSS physical working range: 24" x 39.0". [[Lightburn]] constraint (or maybe BOSS software): about 24"x36". Maximum sheet size that can be placed in the enclosure (overlapping the actual bed: bigger than 24" and bigger than 40", but not exactly sure and your positioning of a sheet that size requires planning.
| |
| * vents to a filter. No MDF, leather, or other smokey/smelly materials.
| |
| * based on testing by a member, the kerf is 0.004" or 0.1016mm | |
| * Using Lightburn at home
| |
| ** select "Ruida" for controller, "Serial/USB", name it, set appropriate bed dimensions (BossLaser is approximately X-axis 1016 mm, Y-axis 609 mm), set origin to "Rear Right".
| |
| The file capacity is 99 files. Once full, new files will not be accepted from the computer to the controller. You may delete files one-by-one or clear them all with Files -> Other -> Delete All Memory Files
| |
| Class: [[BOSS 100W Laser Cutter, BossLaser LS2440]] details
| |
| | |
| == "Red" laser 100w==
| |
| * Chinese parts, no make or model. | |
| * 100 watt
| |
| * bed size: 22" x 26"
| |
| * vents to a filter. MDF, leather, other smokey/smelly materials are not allowed.
| |
| * Using [[Lightburn]] at home
| |
| ** select "Ruida" for controller, "Serial/USB", name it, set appropriate bed dimensions (BossLaser is approximately X-axis 762 mm, Y-axis 660 mm), set origin to "Rear Right".
| |
|
| |
|
| ==Filters== | | ==Filters== |
