Sunbeam Steam Master Iron
Jump to navigation
Jump to search
Description
Sunbeam Steam Master 1400 Watt Mid-size Anti-Drip Non-Stick Soleplate Iron with Variable Steam control and 8' Retractable Cord.
Specifications
- Vertical and Horizontal Steam Shot
- NonStick Soleplate
- 3 way Auto-off:
- Flat - 30 second
- Side - 30 second
- Base upright - 8 minute
- Dimensions: 6.18" H x 5.47"W x 11.88"D
- Weight: 2.79lb.
- Cord length: 8ft.
- Electrical spec: 120VAC 1400W 60Hz
Safety Specifics
All general MN Safety policies of course apply to use of this tool, as do safety policies for the containing shop area and safety practices prescribed in our classes and/or in detailed tool documentation, regardless of whether they're repeated here.
- Use iron only for intended use.
- The iron is intended to rest on the 'heel', don't rest it on sides.
- Do not leave the iron on an unprotected surface while on.
- Turn off when not in use.
- Burn Hazard. Don't touch the soleplate when it's been on and for significant time afterwards to allow for cooling.
- Steam Burn Hazard. Take care when refilling a hot iron. Do not overfill beyond the maximum fill line.
- Don't put away until completely cool.
Documentation
Materials, Tooling, Accessories
- Use the filtered water in the breakroom for the water for the iron. Please empty extra water afterwards.
Settings
Recommended Ironing Temperatures
Tips & Tricks
Sunbeam Ironing Hints and Tips
- Read the label of the fabric so you know the temperature to use. When in doubt, use the lowest setting.
- Make sure your iron is clean before use.
- Use long straight strokes. Wiggling can stretch the fabric.
- Iron around decorative objects, zippers, buttons, sequins, glitter, fine lace.
- Avoid iron sheen by ironing the garment inside out.
- Use bobby pins to secure pleats.
- Hang or fold immediately after ironing.
- Iron down the center of sleeves instead of along the seam.
- Iron clean fabrics.
- Iron 100% cotton while it's damp.
Back to MN-S_Textiles Equipment List