Jet JWDS-1632 16" Drum Sander
Jump to navigation
Jump to search
Description
TBW
Classes
Use of this tool requires successful completion of the BOSS class "Drum Sander" or an equivalent check-off.
Specifications
- Drum Bearing Diameter: 1 in.
- Drum Diameter: 5 in.
- Maximum board width (single pass): 16 in. (406 mm)
- Maximum board width (to passes): 32 in. (812 mm)
- Maximum Board Thickness: 3 in.
- Minimum Board Length: 2 3/8 in.
- Minimum Board Thickness: 1/32 in.
- Weight: 156 lb. (71 kg)
- Motor Power: 1 1/2 HP
- Dust Collection Minimum CFM Required: 400 CFM
- Dust Port Outside Diameter: 4 in.
- Electrical spec:
- 115V 60Hz
- Drum Motor Listed FLA (full load amps): 14A
- Starting amps: 32A
- Running amps (no load): 9.5 A
- Conveyor Motor Listed FLA (full load amps): 0.60A
- Recommended circuit and fuse/breaker size: 20A
MN Asset Details
- Location: Wood Shop
- Model Number: Jet JWDS-1632
- Serial Number: sn
- Motor Serial Number: motorsn
- MN Asset Number: mnAN
Safety Specifics
All general MN Safety policies of course apply to use of this tool, as do safety policies for the containing shop area and safety practices prescribed in our classes and/or in detailed tool documentation, regardless of whether they're repeated here.
TBW
Documentation
Materials, Tooling, Accessories
The drum sander uses sandpaper wraps that are secured to the drum using clips and then wrapped around.
Members are expected to bring their own sandpaper wraps when using the sander, and these are available for sale near the front desk (ask a staff member). Wraps can also be purchased online, and are available from many vendors.
BOSS intro classes cover installation of sandpaper and the class is a prerequisite to use.
Settings
TBW
Tips & Tricks
TBW
Back to MN-S_Wood_Shop Equipment List