Supply Sources for Materials and Services

From makernexuswiki
Revision as of 23:00, 27 December 2017 by Jschrempp (talk | contribs) (→‎Wood)

A list of sources and what we've bought there, at what price. Use this forum when the material is not specific to a particular device. Delvie's Plastics

Plastics

Delvie's Plastics

http://www.delviesplastics.com/ Source for Cast Acrylic sheets, 1/16" thick to 2" thick. They also carry badge pins and clips. Delvie's Plastics is a full line distributor of Rowmark Engraving Materials.

U.S. Plastic

http://www.usplastic.com 800-537-9724 Good source of sheet plastic. They ship it rolled up in a tube. I cut the roll on the power shear at TechShop.

  • Sytrene0.030 40x72 $10 + $10 shipping
  • PET-G (Vivak)0.040 24x48 $18 + $10 shipping

Wood

Southern Lumber

Now closed, but in 2015, 3mm 5x5 foot Baltic Birch plywood $18

Home Depot

Precut 24x18 panels of several plywoods. Many have a nice finish on at least one side.

Mayan Hardwoods

Paso Robles. http://www.mayanhardwood.com/

Retrieved from "http://makernexuswiki.com/index.php?title=Supply_Sources_for_Materials_and_Services&oldid=218"