Keith Dual Chamber Heat Treat Oven

• Keith Dual Chamber Heat Treat Oven (Keith K-120820-D)

Keith Heat Treat Oven

Description

The Keith Dual Chamber Heat Treating Oven is used to precisely regulate the temperature of materials for heat treating, tempering and annealing metals. The dual chamber allows for quick transitions between steps in the heat treating process, with a quenching tank located below the oven as well.

The Heat Treating BOSS class is required to use this device. Standard age restrictions for the Metal Shop apply.

• Ages: 16+
• Reservations
• Usage Fees: none

Classes

• BOSS (Required)
• Advanced Class I
• Making a Plane Blade

Specifications

• Rated for 2250°F temperature (upper chamber) - 1250°F temperature (lower chamber)
• Power kW: 10.8
• Chamber Size W"xH"xD": 12x8x20/17
• Outside Dimensions W"xL"xH": 38x48x57

MN Asset Details

File:Serialnumberplate.jpg

toolname Serial Number Plate

File:Electricalplate.jpg

toolname Electrical Plate

File:Motorplate.jpg

toolname Motor

• Location: Hot Shop
• Model Number: K-120820-D
• Serial Number: sn
• Motor Serial Number: motorsn'
• MN Asset Number: mnAN

Safety Specifics

All general MN Safety policies of course apply to use of this tool, as do safety policies for the containing shop area and safety practices prescribed in our classes and/or in detailed tool documentation, regardless of whether they're repeated here.

If there are specific safety notes in order to operate, put it here. Suggest cross reference to membership handbook as appropriate.

• Restrictions such as - don't do x,y,z without help or at all..
• Only staff can do a,b,c don't attempt yourself
• Safety checklists

Documentation

• user manual link one
• [Controller Manual - West Pro-EC44 Controller]
• Tech Spec Datasheet
• tutorial link one
• tutorial link two
• cookbook
• cheatsheets and checklists

Materials, Tooling, Accessories

If there are required or recommended materials in order to operate, put it here. Any fees for materials, or what might be free for use? What tooling (drill bits, needles) is available from MN? What am I expected to provide? This is also the place to mention interesting non-standard accessories we may have (e.g., specialty work- or tool-hoding devices, indexing plates, ...)

Settings

If there are required or recommended settings in order to operate, put it here. such as...

• Speeds and feeds
• temperature settings for filaments of x,y,z

Tips & Tricks

a place for those useful items from the subject matter experts among us such as...

• tip
• trick
• best practice

Back to MN-S_Metalshop Equipment List