Jet JWDS-1632 16" Drum Sander: Difference between revisions
From makernexuswiki
(Created page with "400px|thumb|left|Jet JWDS-1632 16" Drum Sander <br clear="all"> == Description == ''TBW'' === Classes === ''TBW'' === Specifications ===...") |
(Added BOSS class requirement) |
||
| Line 6: | Line 6: | ||
=== Classes === | === Classes === | ||
{{RequiresBOSS|class=Drum Sander}} | |||
=== Specifications === | === Specifications === | ||
Revision as of 22:20, 31 January 2021
Description
TBW
Classes
Use of this tool requires successful completion of the EQ class "Drum Sander".
Specifications
- Drum Bearing Diameter: 1 in.
- Drum Diameter: 5 in.
- Maximum board width (single pass): 16 in. (406 mm)
- Maximum board width (to passes): 32 in. (812 mm)
- Maximum Board Thickness: 3 in.
- Minimum Board Length: 2 3/8 in.
- Minimum Board Thickness: 1/32 in.
- Weight: 156 lb. (71 kg)
- Motor Power: 1 1/2 HP
- Dust Collection Minimum CFM Required: 400 CFM
- Dust Port Outside Diameter: 4 in.
- Electrical spec:
- 115V 60Hz
- Drum Motor Listed FLA (full load amps): 14A
- Starting amps: 32A
- Running amps (no load): 9.5 A
- Conveyor Motor Listed FLA (full load amps): 0.60A
- Recommended circuit and fuse/breaker size: 20A
MN Asset Details
File:Serialnumberplate.jpg
toolname Serial Number Plate
File:Electricalplate.jpg
toolname Electrical Plate
File:Motorplate.jpg
toolname Motor
- Location: Wood Shop
- Model Number: Jet JWDS-1632
- Serial Number: sn
- Motor Serial Number: motorsn
- MN Asset Number: mnAN
Safety Specifics
All general MN Safety policies of course apply to use of this tool, as do safety policies for the containing shop area and safety practices prescribed in our classes and/or in detailed tool documentation, regardless of whether they're repeated here.
TBW
Documentation
Materials, Tooling, Accessories
TBW
Settings
TBW
Tips & Tricks
TBW
Back to MN-S_Wood_Shop Equipment List
