BossLaser Tips and Tricks: Revision history

From makernexuswiki

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

7 July 2023

  • curprev 00:5100:51, 7 July 2023‎ Jschrempp talk contribs‎ 709 bytes +54‎ No edit summary
  • curprev 00:4500:45, 7 July 2023‎ Jschrempp talk contribs‎ 655 bytes +655‎ Created page with "Q: I have issues with the y-axis being out of scale, and the gantry won't travel past about halfway across the bed. :A: This is a common problem caused by failing to disable the rotary attachment feature in Lightburn while the software still has an active connection to the powered-on laser. You likely remember from your class that the laser must be powered off any time you are connecting or disconnecting the y-axis connector with the rotary attachment. But when you tur..."
Retrieved from "http://makernexuswiki.com/wiki/BossLaser_Tips_and_Tricks"