MN Laser Cutters: Difference between revisions

From makernexuswiki
 
(18 intermediate revisions by 3 users not shown)
Line 1: Line 1:
==Epilog Helix 45w==
[[Category:Equipment]]
* 45 Watt
[[Category:Clean Shop]]
* 18" x 24" bed
 
* vents to a filter. No MDF, leather, or other smokey/smelly materials.
[[File:mn-bosslaser.jpeg|400px|100W laser cutters]]
* on long term loan to MN
[[File:mn-epilog.jpeg|400px|45W laser cutter]]


== BossLaser LS2440 100w==
Our [[Laser Cutters|laser cutters]] are one of the most used tools because it's fast and accurate to cut out your designs. In our facility, you will first set up your design in a vector program like Adobe Illustrator or CorelDRAW. If working with the lower power [[Epilog Helix]], you will "print" your design from the attached computer. Our other two 100W lasers use Lightburn to set the carving order and power settings.
* 100 watt
* 24" x 40" bed
** BOSS physical working range: 24" x 39.0". [[Lightburn]] constraint (or maybe BOSS software): about 24"x36". Maximum sheet size that can be placed in the enclosure (overlapping the actual bed: bigger than 24" and bigger than 40", but not exactly sure and your positioning of a sheet that size requires planning.
* vents to a filter. No MDF, leather, or other smokey/smelly materials.
* based on testing by a member, the kerf is 0.004" or 0.1016mm
* Using Lightburn at home
** select "Ruida" for controller, "Serial/USB", name it, set appropriate bed dimensions (BossLaser is approximately X-axis 1016 mm, Y-axis 609 mm), set origin to "Rear Right".
The file capacity is 99 files.  Once full, new files will not be accepted from the computer to the controller. You may delete files one-by-one or clear them all with Files -> Other -> Delete All Memory Files
Class: [[BOSS 100W Laser Cutter, BossLaser LS2440]] details


== "Red" laser 100w==
== Laser Cutters Reference ==
* Chinese parts, no make or model.
* [[Epilog Helix]] - 45W, 18x24" (450x600 mm); practical size 17x23" (430x590 mm)
* 100 watt
* [[BossLaser LS2440]] - 100W, 24x40" (600x1000 mm); practical size 23x39" (590x980 mm)
* bed size: 22" x 26"
* [[Red Laser]] - 100W, 19.6x27.5" (500x700 mm); practical size 19x27" (480x690 mm)
* vents to a filter. MDF, leather, other smokey/smelly materials are not allowed.
* Using [[Lightburn]] at home
** select "Ruida" for controller, "Serial/USB", name it, set appropriate bed dimensions (BossLaser is approximately X-axis 762 mm, Y-axis 660 mm), set origin to "Rear Right".


==Filters==
==Filters==
Line 29: Line 17:
==Air Compressors==
==Air Compressors==


== tags for search ==
== Recommended CO2 Laser cutter / Engraver settings ==
working area
 
=== Boss Laser 100W ===
 
The following is extracted from a historical
[https://web.archive.org/web/20210414201911/https://www.bosslaser.com/laser-settings/ page]
on the Boss Laser for 100W settings
 
{| class="wikitable"
|+ CO2 Laser Cutter / Engraver Settings For Common Materials
|-
!Material                          || Power % ||  Speed(mm/s) ||  Interval / scan <br> GAP (mm) || Thickness
|-
|ACRYLIC - Engraving                ||  20    ||      350    ||      .065        || ANY
|-
|ACRYLIC - Cutting                  ||  75    ||        15    ||      N/A        ||  1/4"
|-
|Anodized Aluminum - Engraving      ||  20    ||        325    ||      .065        ||  ANY
|-
|Balsa Wood - Engraving            ||  20    ||        350    ||      .065        ||  Any
|-
|Balsa Wood - Cutting              ||  55    ||        25    ||      N/A        ||  1/8"
|-
|Bass Wood - Engraving              ||  25    ||        350    ||      .065        ||  Any
|-
|Bass Wood - Cutting                ||  55    ||        25    ||      N/A          || 1/8"
|-
|Birch Wood - Engraving            ||  25    ||        350    ||      .065        ||  Any
|-
|Birch Wood - Cutting              ||  70    ||        15    ||      N/A        ||  1/4"
|-
|Birch Plywood - Engraving          ||  25    ||        350    ||      .065        ||  Any
|-
|Birch Plywood - Cutting            ||  75    ||        15    ||      N/A        ||  1/4"
|-
|Cardboard - Engraving              ||  20    ||        350    ||      .065        ||  Any
|-
|Cardboard - Cutting                ||  60    ||        15    ||      N/A        ||  1/4"
|-
|Ceramic - Engraving                ||  40    ||        350    ||      .065        ||  Any
|-
|Glass - Engraving                  ||  25    ||        325    ||      .065        || Any
|-
|Granite - Engraving                ||  25    ||        275    ||      .065        ||  Any
|-
|Leather - Engraving                ||  18    ||        350    ||      .065        ||  Any
|-
|Leather - Cutting                  ||  75    ||        12    ||      N/A        ||  1/8"
|-
|Powder-coated Metal - Engraving    ||  20    ||        325    ||      .065        ||  Any
|-
|Mirror - Back-side; Engraving      ||  20    ||        325    ||      .065        ||  Any
|-
|Paper - Cutting                    ||  15    ||        25    ||      N/A        ||  1/100"
|-
|Romark - Multi-colored; Engraving  ||  20    ||        350    ||      .065        ||  Any
|-
|Rubber - Engraving                ||  20    ||        350    ||      .065        ||  Any
|-
|Rubber - Cutting                  ||  75    ||        12    ||      N/A        ||  1/8"
|-
|Foam - Cutting                    ||  55    ||        25    ||      N/A        ||  1/4"
|}
 
=== Member Settings ===
 
{| class="wikitable"
|+ CO2 Laser Cutter / Engraver Settings For Common Materials
|-
!Material                          || Power % ||  Speed(mm/s) ||  Interval / scan <br> GAP (mm) || Thickness
|-
|CARDBOARD - C Flute            ||  45, 35    ||      65    ||      -        || 3mm
|-
|PAPER - Cardstock            ||  10    ||      65    ||      -        || 80 lb
|-
|PAPER - Linen paper            ||  15    ||      65    ||      -        || Thick
|-
|}


[[Category:Equipment]]
==Software==
See [https://makernexuswiki.com/wiki/Lightburn Lighburn]

Latest revision as of 13:41, 15 October 2025


100W laser cutters 45W laser cutter

Our laser cutters are one of the most used tools because it's fast and accurate to cut out your designs. In our facility, you will first set up your design in a vector program like Adobe Illustrator or CorelDRAW. If working with the lower power Epilog Helix, you will "print" your design from the attached computer. Our other two 100W lasers use Lightburn to set the carving order and power settings.

Laser Cutters Reference

  • Epilog Helix - 45W, 18x24" (450x600 mm); practical size 17x23" (430x590 mm)
  • BossLaser LS2440 - 100W, 24x40" (600x1000 mm); practical size 23x39" (590x980 mm)
  • Red Laser - 100W, 19.6x27.5" (500x700 mm); practical size 19x27" (480x690 mm)

Filters

3 BOFA HEPA filters

Air Compressors

Recommended CO2 Laser cutter / Engraver settings

Boss Laser 100W

The following is extracted from a historical page on the Boss Laser for 100W settings

CO2 Laser Cutter / Engraver Settings For Common Materials
Material Power % Speed(mm/s) Interval / scan
GAP (mm)		 Thickness
ACRYLIC - Engraving 20 350 .065 ANY
ACRYLIC - Cutting 75 15 N/A 1/4"
Anodized Aluminum - Engraving 20 325 .065 ANY
Balsa Wood - Engraving 20 350 .065 Any
Balsa Wood - Cutting 55 25 N/A 1/8"
Bass Wood - Engraving 25 350 .065 Any
Bass Wood - Cutting 55 25 N/A 1/8"
Birch Wood - Engraving 25 350 .065 Any
Birch Wood - Cutting 70 15 N/A 1/4"
Birch Plywood - Engraving 25 350 .065 Any
Birch Plywood - Cutting 75 15 N/A 1/4"
Cardboard - Engraving 20 350 .065 Any
Cardboard - Cutting 60 15 N/A 1/4"
Ceramic - Engraving 40 350 .065 Any
Glass - Engraving 25 325 .065 Any
Granite - Engraving 25 275 .065 Any
Leather - Engraving 18 350 .065 Any
Leather - Cutting 75 12 N/A 1/8"
Powder-coated Metal - Engraving 20 325 .065 Any
Mirror - Back-side; Engraving 20 325 .065 Any
Paper - Cutting 15 25 N/A 1/100"
Romark - Multi-colored; Engraving 20 350 .065 Any
Rubber - Engraving 20 350 .065 Any
Rubber - Cutting 75 12 N/A 1/8"
Foam - Cutting 55 25 N/A 1/4"

Member Settings

CO2 Laser Cutter / Engraver Settings For Common Materials
Material Power % Speed(mm/s) Interval / scan
GAP (mm)		 Thickness
CARDBOARD - C Flute 45, 35 65 - 3mm
PAPER - Cardstock 10 65 - 80 lb
PAPER - Linen paper 15 65 - Thick

Software

See Lighburn

Retrieved from "http://makernexuswiki.com/index.php?title=MN_Laser_Cutters&oldid=5430"