View source for File:CovidShield RC2 2x 0.25mm PLA MK3S 5h56m.gcode.txt

From makernexuswiki

← File:CovidShield RC2 2x 0.25mm PLA MK3S 5h56m.gcode.txt

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page.

Remove .txt extension for printing (it should be a .gcode file for the printer)

Return to File:CovidShield RC2 2x 0.25mm PLA MK3S 5h56m.gcode.txt.

Retrieved from "http://makernexuswiki.com/wiki/File:CovidShield_RC2_2x_0.25mm_PLA_MK3S_5h56m.gcode.txt"