All public logs
Jump to navigation
Jump to search
Combined display of all available logs of makernexuswiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 00:50, 30 December 2023 Jschrempp talk contribs created page Sawgrass SG1000 Sublimation Printer (Created page with "Prints onto special paper and that is applied to a surface with heat. Fabrics and objects that lay flat can use the heat press. Shaped objects need a compression sleeve and the oven. This process will print well on dark fabrics. A good source of supplies: [https://www.heattransferwarehouse.com/ Heat Transfer Warehouse]. They are not crazy expensive, but not cheap.")
- 15:25, 28 December 2023 Jschrempp talk contribs uploaded File:Rotating laser joint.png (example of a rotating joint with a stop point)
- 15:25, 28 December 2023 Jschrempp talk contribs created page File:Rotating laser joint.png (example of a rotating joint with a stop point)
- 14:09, 21 December 2023 User account Ally.kraus talk contribs was created by Jschrempp talk contribs and password was sent by email
- 15:11, 11 December 2023 Jschrempp talk contribs blocked 120.11.91.185 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 15:07, 11 December 2023 User account Allyk talk contribs was created by Jschrempp talk contribs and password was sent by email
- 20:53, 6 November 2023 Jschrempp talk contribs created page Advice: Wood Glue Ups (Created page with "= One man's opinions = [https://www.youtube.com/watch?v=Wmw5rayNIV4 This video clip] has some good general tips to start with. Don’t over-clamp the joint. I’m right-handed, so I use the left-hand cue i.e. the turn the clamp with my left hand just enough. That gives me a good feel for the tightening. There is a lot of gluing in an end grain cutting board. So, make the clean up easy by applying just the right amount of glue (as above). If there is squeeze out, resist...")
- 10:45, 4 November 2023 Jschrempp talk contribs created page Drum sander tips (Created page with "In the shared shop environment you have to assume every tool is slightly out of adjustment unless you adjust it as you are starting your job, and assume it will be out of adjustment the next day you need to use that tool. The drum sander should be adjusted slightly tighter on the motor side. On a project desiring high precision and parallel you should make the adjustment for your job and hopefully put it back when you are done. For jobs narrower than 16” not req...")
- 15:18, 3 November 2023 Jschrempp talk contribs created page Wood preparation tips 1 (Created page with "= Precision is key = 400px|right|I recently finished an end grain cutting board that I recently finished. In response to a couple of questions from other members who saw me in the process of building it, here are some build notes that may be of help. I am not going to describe how to build edge grain cutting boards here - there are enough videos on YT that describe how to do that. Instead, I would like to focus on “precision” since even t...")
- 15:00, 3 November 2023 Jschrempp talk contribs uploaded File:CuttingBoard.jpg (Precision end grain cutting board)
- 15:00, 3 November 2023 Jschrempp talk contribs created page File:CuttingBoard.jpg (Precision end grain cutting board)
- 10:44, 28 October 2023 Jschrempp talk contribs changed group membership for Kellybyrd from administrator to (none)
- 10:44, 28 October 2023 Jschrempp talk contribs changed group membership for DanR from bureaucrat and administrator to (none)
- 10:44, 28 October 2023 Jschrempp talk contribs changed group membership for Ajohnson from administrator to (none)
- 19:53, 19 September 2023 Jschrempp talk contribs created page Changing Barudan Frame (Created page with "Q: I have some material that does not fit into the standard textile frames - I saw some yellow metal frames that look like they work, but no idea how to get them into the machine. :A: Undo the 4 black turn knobs. Slide the pantograph frame out. Slide the clamp frame in. Tighten the 2 centre black knobs. Make sure before you tighten the knobs that the frame is sitting right down and the two little buttons are poking through the holes by the knobs. Reverse the procedure...")
- 19:53, 19 September 2023 Jschrempp talk contribs uploaded File:Barudan knob 6.jpg (knob 6)
- 19:53, 19 September 2023 Jschrempp talk contribs created page File:Barudan knob 6.jpg (knob 6)
- 19:52, 19 September 2023 Jschrempp talk contribs uploaded File:Barudan knob 5.jpg (knob 5)
- 19:52, 19 September 2023 Jschrempp talk contribs created page File:Barudan knob 5.jpg (knob 5)
- 19:51, 19 September 2023 Jschrempp talk contribs uploaded File:Barudan knob 4.jpg (knob 4)
- 19:51, 19 September 2023 Jschrempp talk contribs created page File:Barudan knob 4.jpg (knob 4)
- 19:50, 19 September 2023 Jschrempp talk contribs uploaded File:Barudan knob 3.jpg (knob 3)
- 19:50, 19 September 2023 Jschrempp talk contribs created page File:Barudan knob 3.jpg (knob 3)
- 19:49, 19 September 2023 Jschrempp talk contribs uploaded File:Barudan knob 2.jpg (knob 2)
- 19:49, 19 September 2023 Jschrempp talk contribs created page File:Barudan knob 2.jpg (knob 2)
- 19:49, 19 September 2023 Jschrempp talk contribs uploaded File:Barudan knob 1.jpg (knob 1)
- 19:49, 19 September 2023 Jschrempp talk contribs created page File:Barudan knob 1.jpg (knob 1)
- 19:47, 19 September 2023 Jschrempp talk contribs uploaded File:Barudan- 9 17 2023 , 2 48 58 PM.jpg (Front view showing 2 release knobs)
- 19:47, 19 September 2023 Jschrempp talk contribs created page File:Barudan- 9 17 2023 , 2 48 58 PM.jpg (Front view showing 2 release knobs)
- 10:52, 7 September 2023 Jschrempp talk contribs moved page BOSS 100W Laser Cutter, BossLaser LS2440 to BOSS Class: 100W Laser Cutter, BossLaser LS2440 (To make it clear that this is a BOSS class page)
- 10:50, 7 September 2023 Jschrempp talk contribs created page Red Laser (Created page with "== Specifics == * Chinese parts, no make or model. * 100 watt * bed size: 22" x 26" * vents to a filter. MDF, leather, other smokey/smelly materials are not allowed. == Training == * links to BOSS class documents in the MN Members Team Drive * links to specific BossLaser videos * Information common to all lasers == Tips / Tricks specific to the Helix == * Using Lightburn at home ** select "Ruida" for controller, "Serial/USB", name it, set appropri...")
- 10:48, 7 September 2023 Jschrempp talk contribs created page BossLaser LS2440 (Created page with "== Specifics == * 100 watt * 24" x 40" bed ** BOSS physical working range: 24" x 39.0". Lightburn constraint (or maybe BOSS software): about 24"x36". Maximum sheet size that can be placed in the enclosure (overlapping the actual bed: bigger than 24" and bigger than 40", but not exactly sure and your positioning of a sheet that size requires planning. * vents to a filter. No MDF, leather, or other smokey/smelly materials. * based on testing by a member, the kerf is 0...")
- 10:44, 7 September 2023 Jschrempp talk contribs created page Epilog Helix (Created page with "== Specifics == * 45 Watt * 18" x 24" bed * vents to a filter. No MDF, leather, or other smokey/smelly materials. * on long term loan to MN == Training == * links to BOSS class documents in the MN Members Team Drive * links to specific BossLaser videos * Information common to all lasers == Tips / Tricks specific to the Helix == == Documentation == * links to manufactures documents * MN asset page")
- 19:18, 29 August 2023 Jschrempp talk contribs created page Amilia Migration Tips (Created page with "These are tips that might help a member moving to Amilia. Q: I'm trying to buy a membership using my phone and it asks me to pick a person, but there are no persons? :A: That pop up box will scroll. Use a finger and scroll up to see your name. That is an unfortunate user interface glitch. Q: My membership just renewed. Why should I pay again in Amilia right now? :A: We do not want you double charge you! When you buy your membership in Amilia we will credit your Amilia...")
- 14:35, 28 July 2023 Jschrempp talk contribs created page Donations (Created page with "Thank you for thinking of Maker Nexus. We appreciate it. As you can imagine, we get a lot of donations of used equipment, tools, and supplies. A lot of our makerspace was built up this way and we love it. At the same time, we have reached the point where we have to be more selective about the donations we accept. We have limited storage space, and it's pretty full. We also have to be careful about the type of equipment we take. Equipment and tools have to be sturdy e...")
- 14:19, 12 July 2023 Jschrempp talk contribs moved page Ace Monster Toys to Ace Makerspace
- 00:50, 7 July 2023 Jschrempp talk contribs uploaded File:Lightburn Rotary Setup annotated.png
- 00:50, 7 July 2023 Jschrempp talk contribs created page File:Lightburn Rotary Setup annotated.png
- 00:45, 7 July 2023 Jschrempp talk contribs created page BossLaser Tips and Tricks (Created page with "Q: I have issues with the y-axis being out of scale, and the gantry won't travel past about halfway across the bed. :A: This is a common problem caused by failing to disable the rotary attachment feature in Lightburn while the software still has an active connection to the powered-on laser. You likely remember from your class that the laser must be powered off any time you are connecting or disconnecting the y-axis connector with the rotary attachment. But when you tur...")
- 14:11, 4 July 2023 Jschrempp talk contribs created page Long Arm Quilter (Created page with "== Description == '''Important Info''': Neither the bobbin case nor the needles from the Consew (walking foot) fit any other machine. Likewise, neither the bobbin case nor the needles from the long arm fit any other machine. The long arm uses 16/100 needles. The easiest way to identify the long arm bobbin case vs. Consew (they both take size M bobbins) is that with the needle port (large opening at the top of the bobbin case) at the very top, the latching lever on the l...")
- 02:02, 27 June 2023 Jschrempp talk contribs changed group membership for KellyY from (none) to administrator
- 01:53, 26 June 2023 Jschrempp talk contribs changed group membership for HaleyM from (none) to administrator (temporary, until 02:53, 26 December 2023) (edit the MN page)
- 19:45, 16 June 2023 Jschrempp talk contribs changed group membership for EricHess from administrator and uploadaccess to uploadaccess
- 10:56, 2 June 2023 Jschrempp talk contribs created page Amilia (Created page with "In 2023 we did a pretty thorough evaluation of Amilia by SmartRec for our makerspace. Here are a few things we learned. * Machine Reservations: We made each machine a Facility in Amilia. The presentation to our users was the best of all options. The downside is that we can't limit reservations to members or to members with certain Skills. Amilia is considering an enhancement to add this feature. We'll deal with this by exception. ** Activities? We considered making each...")
- 14:27, 7 April 2023 User account Mfdyck talk contribs was created by Jschrempp talk contribs and password was sent by email
- 20:03, 27 March 2023 Jschrempp talk contribs created page Makernexuswiki:Privacy policy (Created page with "Our privacy policy is [https://makernexus-erp-odoo.odoo.com/privacy-policy available here]")
- 10:49, 27 March 2023 Jschrempp talk contribs blocked 185.89.32.0/20 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 11:26, 18 March 2023 Jschrempp talk contribs uploaded File:Lightburn grid screenshot.png
- 11:26, 18 March 2023 Jschrempp talk contribs created page File:Lightburn grid screenshot.png
- 11:19, 18 March 2023 Jschrempp talk contribs uploaded File:Lightburn material test.png
- 11:19, 18 March 2023 Jschrempp talk contribs created page File:Lightburn material test.png
- 11:18, 18 March 2023 Jschrempp talk contribs uploaded File:Lightburn lasertools.png
- 11:18, 18 March 2023 Jschrempp talk contribs created page File:Lightburn lasertools.png
- 11:16, 18 March 2023 Jschrempp talk contribs created page File:Lightburn material test example.jpg
- 11:16, 18 March 2023 Jschrempp talk contribs uploaded File:Lightburn material test example.jpg
- 19:56, 7 February 2023 Jschrempp talk contribs blocked 46.71.96.0/20 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 19:55, 7 February 2023 Jschrempp talk contribs blocked 101.128.96.0/20 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 19:55, 7 February 2023 Jschrempp talk contribs blocked 176.192.224.0/20 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 19:54, 7 February 2023 Jschrempp talk contribs blocked 83.220.224.0/20 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 21:33, 5 February 2023 Jschrempp talk contribs blocked 113.254.176.0/20 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 16:13, 4 February 2023 Jschrempp talk contribs blocked 180.249.128.0/22 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 11:19, 31 January 2023 Jschrempp talk contribs blocked 101.128.98.0/24 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 13:58, 28 January 2023 Jschrempp talk contribs changed group membership for Alingo from (none) to uploadaccess
- 14:07, 26 January 2023 Jschrempp talk contribs blocked 93.142.3.0/24 talk with an expiration time of indefinite (account creation disabled)
- 14:06, 26 January 2023 Jschrempp talk contribs blocked 101.128.96.0/24 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 14:06, 26 January 2023 Jschrempp talk contribs blocked 171.226.33.0/24 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 11:37, 25 January 2023 Jschrempp talk contribs created page MN Member Dashboard (Created page with "We have a number of systems that members need to access. It can be hard to keep all the URLs sorted out. You can bookmark them all, or you can just bookmark this one page and come here when you need to find a system. * Reserve Equipment in the [https://makernexus.ezfacility.com Self Service Portal] * Sign up for [https://www.activityhero.com/biz/maker-nexus classes]")
- 21:49, 23 January 2023 Jschrempp talk contribs blocked 200.3.25.0/24 talk with an expiration time of indefinite (anonymous users only, account creation disabled) (spam users)
- 21:06, 22 January 2023 Jschrempp talk contribs blocked 190.62.20.0/24 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 18:47, 19 January 2023 Jschrempp talk contribs changed group membership for Ajohnson from (none) to administrator
- 11:53, 18 January 2023 Jschrempp talk contribs deleted page Weller WX1 Soldering Station (content was: "400px|thumb|left|alternative text name of tool <br clear="all"> == Description == ''TBW'' === Classes === ''TBW'' <br clear="all"> 300px|thumb|right|Weller WX1 Soldering Station Name Plate === MN Asset Details === * ''MN Asset Number: '' '''mn-708''' * ''Location: '' '''Electronics''' * ''Model Number: '' '''WX1''' * ''Serial Number: '' '''112 44/15 2269''' === Specifications ===...")
- 11:53, 18 January 2023 Jschrempp talk contribs deleted page MakerBot Replicator 2 Desktop 3D Printer (content was: "400px|thumb|left|MakerBot Replicator 2 Desktop 3D Printer <br clear="all"> == Description == ''TBW'' === Classes === ''TBW'' === Specifications === ''TBW'' *''Electrical Spec: '' ::ACInput: 100–240V,~2amps,50–60Hz ::Power Requirements: 24 V DC @ 6.25 amps <div class="toccolours mw-collapsible mw-collapsed"> ===MN Asset Details=== <div class="mw-coll...", and the only contributor was "JSaxe" (talk))
- 11:52, 18 January 2023 Jschrempp talk contribs created page MN-S Equipment Offline (Created page with "This page tracks equipment that is in the makerspace but not yet ready for members to use. For instance, some of the metal CNC machines are not ready for members to use, but the clearly belong to the metal shop and will be listed on that page. This page is for equipment that we are not sure where it will go yet. * Injection Molding Machine")
- 11:48, 18 January 2023 Jschrempp talk contribs deleted page 3D Pleated Mask Making (content was: "<!-- 3D Pleated Mask Making --> <span style="font-size:150%;">'''** DRAFT ** DRAFT ** DRAFT **'''</span> <div style=" border: 1px solid black; padding: 2px 6px 2px 6px; background-color:pink">This page is a rough draft with unchecked content. Don't rely on it and please don't link to it.</div> <!-- Use the following for a single photo: --> <!-- 400px|thumb|left|OPTIONAL_CAPTION_GOES_HERE <br clear="all"> --> <!-- Use the following fo...")
- 11:43, 18 January 2023 Jschrempp talk contribs moved page MN Woodlathe advice to MN Wood Lathe advice
- 11:42, 18 January 2023 Jschrempp talk contribs created page MN Woodlathe advice (Created page with "== Tools == We have tools just for class use. We also have tools for general use in the red chest. If you are using the tools in the red chest we encourage you to donate each day that you use them toward sharpening and replacement. Once you decide you enjoy turning, we recommend you buy your own and sharpen them when and how you wish. With experience we each learn we prefer different grinds and working with sharp tools makes all the difference. == Wood Selection fo...")
- 21:09, 17 January 2023 User account Ajohnson talk contribs was created by Jschrempp talk contribs and password was sent by email
- 21:09, 17 January 2023 User account Owendelong talk contribs was created by Jschrempp talk contribs and password was sent by email
- 21:09, 17 January 2023 User account Tool talk contribs was created by Jschrempp talk contribs and password was sent by email
- 22:58, 14 January 2023 Jschrempp talk contribs created page MN-S Electronics Wish List (Created page with "What do we need for the Electronics / Robotics lab? New bench equipment? Better soldering tips? A shelf? IF we had money to spend, what would we spend it on? Some new stuff? Maybe a refresh of stuff we have that's too well used? It could be inexpensive, it could be expensive. If we have it on this page, then maybe we can arrange to get it. You can use this page in two ways: specific or general. * The specific recommendations should point us to a particular make/model...")
- 11:48, 10 January 2023 Jschrempp talk contribs blocked 101.128.97.140 talk with an expiration time of indefinite (anonymous users only, account creation disabled) (spam users)
- 13:51, 29 December 2022 Jschrempp talk contribs blocked 183.199.0.0/16 talk with an expiration time of indefinite (anonymous users only, account creation disabled) (spammers)
- 13:45, 29 December 2022 Jschrempp talk contribs blocked 183.199.125.30 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 13:44, 29 December 2022 Jschrempp talk contribs blocked 183.199.125.203 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 17:02, 26 December 2022 Jschrempp talk contribs blocked 183.199.125.13 talk with an expiration time of indefinite (anonymous users only, account creation disabled)
- 15:50, 26 December 2022 Jschrempp talk contribs blocked 183.199.125.36 talk with an expiration time of 1 year (anonymous users only, account creation disabled)
- 15:48, 26 December 2022 Jschrempp talk contribs blocked 103.45.234.75 talk with an expiration time of 1 year (anonymous users only, account creation disabled)
- 14:56, 20 December 2022 Jschrempp talk contribs blocked PQQRosemary talk contribs with an expiration time of indefinite (account creation disabled)
- 14:55, 20 December 2022 Jschrempp talk contribs deleted page User:PQQRosemary (content was: "24 years old Dressmaker or Tailor Roten from Haliburton, enjoys to spend time interior design, camlock and cross-stitch. Is a travel enthusiast and recently paid a visit to Barcelona.<br><br>Here is my web site ... [https://www.shunchengvalve.com/pipe-fittings-manufacturer-and-supplier/ additional hints]", and the only contributor was "PQQRosemary" (talk))
- 14:55, 20 December 2022 Jschrempp talk contribs deleted page Types Of Bathroom Water Control Devices (Spam: content was: "<br>The top entry ball valve is one of the most common valves that can be found in most kitchens. These types of valves are perfect for use in the bathroom and kitchen. There are a few different types that are available to you so it will be important for you to determine what is right for your home. Let's take a look at these different types of valve and how they c...", and the only contributor was "PQQRosemary" ([[User talk:PQQRosemar...)
- 22:28, 19 December 2022 User account ChrisFitzhugh talk contribs was created by Jschrempp talk contribs and password was sent by email
- 11:48, 19 December 2022 Jschrempp talk contribs deleted page Have Some Online Fun With Baccarat (content was: "Nо Personal Privacy - Ιf are generaⅼly gooⅾ at playing poker, chances have you can attract һuge connected wіth crowd in yoսr back. Goօd if tһey stay hushed. Ᏼut sometimes thеy kеep on talking and chatting with each other, gіving their opinion of whаt'ѕ the verу ƅest move, and many others. That if I were the player, Ι would surely ƅe annoy...", and the only contributor was "SylvesterA53" (talk))
- 11:47, 19 December 2022 Jschrempp talk contribs blocked SylvesterA53 talk contribs with an expiration time of indefinite (account creation disabled, autoblock disabled) (spam baccarat page)
- 21:50, 17 December 2022 Jschrempp talk contribs changed group membership for Nickgarvey from (none) to uploadaccess
- 20:54, 13 December 2022 User account Alingo talk contribs was created by Jschrempp talk contribs and password was sent by email
- 12:53, 13 December 2022 Jschrempp talk contribs moved page Tips on using Slack. to Tips on using Slack
- 12:51, 13 December 2022 Jschrempp talk contribs created page Tips on using Slack. (Created page with "Slack can be used to great effect within a community. It can be a fun, chatty way to communicate, but it can also become a dog pile of random stuff. Slack is a chat tool. The...")
- 15:00, 11 December 2022 Jschrempp talk contribs changed group membership for Kellybyrd from (none) to administrator
- 14:57, 11 December 2022 User account Kellybyrd talk contribs was created by Jschrempp talk contribs and password was sent by email
- 10:16, 19 October 2022 User account Bhelkey talk contribs was created by Jschrempp talk contribs and password was sent by email