Powermatic PM180 18" Planer
Jump to navigation
Jump to search
Description
TBW
Classes
Use of this tool requires successful completion of the BOSS class "Woodshop I - table saw, jointer, planer, miter saw" or an equivalent check-off.
Specifications
TBW
- Electrical spec:
- V 203 / V 460
- F.L.A. 19.0 / F.L.A. 9.5
- HZ 60
MN Asset Details
Safety Specifics
All general MN Safety policies of course apply to use of this tool, as do safety policies for the containing shop area and safety practices prescribed in our classes and/or in detailed tool documentation, regardless of whether they're repeated here.
TBW
Documentation
Operating Instructions And Parts List
Maintenance Instructions And Parts List
Materials, Tooling, Accessories
TBW
Settings
TBW
Tips & Tricks
Q: How little can you take off with one pass through the planer?
- A: 1/16” is about the minimum reliable amount you can take off. It also depends on the wood, soft woods are going to show feed roller indentations that the cutters don't remove, more so than a hardwood. If you want smaller increments then use the drum sander, there you can take off as little as 1/64”.
Back to MN-S Wood Shop Equipment List