Makita LC1230 12" Metal Cutting Saw
Jump to navigation
Jump to search
Description
TBW
Classes
Use of this machine will require a BOSS class, to be developed. Meanwhile use is restricted to approved staff and volunteers.
Specifications
- Blade Diameter: 12"
- No Load Speed: 1,700 RPM
- Max. Cutting Capacity (at 90°): 4½"
- Max. Cutting Capacity (at 45°): 3½"
- Arbor: 1"
- Max. kerf thickness of the saw blade
2.5 mm (3/32")
- Electrical spec: 120V~ 15A 50/60Hz
MN Asset Details
- Location: Wood Shop
- Model Number: Makita LC1230
- Serial Number: sn
- Motor Serial Number: motorsn
- MN Asset Number: mnAN
Safety Specifics
All general MN Safety policies of course apply to use of this tool, as do safety policies for the containing shop area and safety practices prescribed in our classes and/or in detailed tool documentation, regardless of whether they're repeated here.
- The saw is loud and throws hot chips. Wear eye and ear protection.
- Check blade to make sure it is intact and that it turns freely.
- Use the vise to hold metal; do not use your hand.
- Cut only new (mild) steel and non-ferrous metal. No hardened steel, junk mystery metal, tools, axles, HSS tool bits, etc.
- Allow blade to come up to speed. Cut smoothly. Don’t force it, bump it, or make it bog down.
Documentation
Materials, Tooling, Accessories
TBW
Settings
TBW
Tips & Tricks
TBW
Back to MN-S Metalshop Equipment List