View source for Makita LC1230 12" Metal Cutting Saw

[[File:full_image.jpg|400px|thumb|left|Makita LC1230 12" Metal Cutting Saw]]
<br clear="all">

== Description ==

''TBW''

=== Classes ===
Use of this machine will require a Equipment Training class, to be developed. Meanwhile use is restricted to approved staff and volunteers.

=== Specifications ===
* Blade Diameter: 12"
* No Load Speed: 1,700 RPM
* Max. Cutting Capacity (at 90°): 4&frac12;"
* Max. Cutting Capacity (at 45°): 3&frac12;"
* Arbor: 1"
* Max. kerf thickness of the saw blade
2.5 mm (3/32")

* ''Electrical spec: '' '''120V~ 15A 50/60Hz'''

<div class="toccolours mw-collapsible mw-collapsed">
===MN Asset Details===
<div class="mw-collapsible-content">
[[File:serialnumberplate.jpg|300px|thumb|right|toolname Serial Number Plate]]
[[File:electricalplate.jpg|300px|thumb|right|toolname Electrical Plate]]
[[File:motorplate.jpg|300px|thumb|right|toolname Motor]]
* ''Location: '' '''Wood Shop'''
* ''Model Number: '' '''Makita LC1230'''
* ''Serial Number: '' '''sn'''
* ''Motor Serial Number: '' '''motorsn'''
* ''MN Asset Number: '' '''mnAN'''
<br clear="all">
</div></div>

==Safety Specifics==

{{AllSafetyRulesApply}}

* The saw is loud and throws hot chips. Wear eye and ear protection.
* Check blade to make sure it is intact and that it turns freely.
* Use the vise to hold metal; do not use your hand.
* Cut only new (mild) steel and non-ferrous metal. No hardened steel, junk mystery metal, tools, axles, HSS tool bits, etc.
* Allow blade to come up to speed. Cut smoothly. Don’t force it, bump it, or make it bog down.

==Documentation==
* [https://www.makitatools.com/products/details/LC1230 Manufacturer's product page with links to documentation]
* [https://cdn.makitatools.com/apps/cms/doc/prod/LC1/5ff88dd0-ac11-422f-8d04-b7d828bd089c_LC1230_IM.pdf Direct link to instruction manual]

==Materials, Tooling, Accessories==
''TBW''

==Settings==
''TBW''

==Tips & Tricks==
''TBW''

Back to [[MN Metal Shop]] Equipment List