MN-S Laser Cutters: Difference between revisions
Jump to navigation
Jump to search
Line 8: | Line 8: | ||
* 100 watt | * 100 watt | ||
* 24" x 40" bed | * 24" x 40" bed | ||
** BOSS physical working range: 24" x 39.0". Lightburn constraint (or maybe BOSS software): about 24"x36". Maximum sheet size that can be placed in the enclosure (overlapping the actual bed: bigger than 24" and bigger than 40", but not exactly sure and your positioning of a sheet that size requires planning. | ** BOSS physical working range: 24" x 39.0". [[Lightburn]] constraint (or maybe BOSS software): about 24"x36". Maximum sheet size that can be placed in the enclosure (overlapping the actual bed: bigger than 24" and bigger than 40", but not exactly sure and your positioning of a sheet that size requires planning. | ||
* vents to a filter. No MDF, leather, or other smokey/smelly materials. | * vents to a filter. No MDF, leather, or other smokey/smelly materials. | ||
* based on testing by a member, the kerf is 0.004" or 0.1016mm | * based on testing by a member, the kerf is 0.004" or 0.1016mm | ||
* Using Lightburn at home | * Using [[Lightburn]] at home | ||
** select "Ruida" for controller, "Serial/USB", name it, set appropriate bed dimensions (BossLaser is approximately X-axis 1016 mm, Y-axis 609.6 mm), set origin to "Rear Right". | ** select "Ruida" for controller, "Serial/USB", name it, set appropriate bed dimensions (BossLaser is approximately X-axis 1016 mm, Y-axis 609.6 mm), set origin to "Rear Right". | ||
Revision as of 22:14, 30 July 2021
Epilog Helix 45w
- 45 Watt
- 18" x 24" bed
- vents to a filter. No MDF, leather, or other smokey/smelly materials.
- on long term loan to MN
BossLaser LS2440 100w
- 100 watt
- 24" x 40" bed
- BOSS physical working range: 24" x 39.0". Lightburn constraint (or maybe BOSS software): about 24"x36". Maximum sheet size that can be placed in the enclosure (overlapping the actual bed: bigger than 24" and bigger than 40", but not exactly sure and your positioning of a sheet that size requires planning.
- vents to a filter. No MDF, leather, or other smokey/smelly materials.
- based on testing by a member, the kerf is 0.004" or 0.1016mm
- Using Lightburn at home
- select "Ruida" for controller, "Serial/USB", name it, set appropriate bed dimensions (BossLaser is approximately X-axis 1016 mm, Y-axis 609.6 mm), set origin to "Rear Right".
"Red" laser 100w
- Chinese parts, no make or model.
- 100 watt
- bed size: 30" x 26"
- vents to a filter. MDF, leather, other smokey/smelly materials are not allowed.
Thunder laser 100w
- 100 watt
- on long term loan to MN
- ?" x ?"
- not available to members yet.
Filters
4 BOFA HEPA filters
Air Compressors
tags for search
working area