Clausing-Colchester 6527 13" x 36" Gap Bed Lathe: Difference between revisions
Jump to navigation
Jump to search
m (fixed typo) |
m (Corrected some typos; changed some fractions to use template; abbreviated "inches" as "in." (since "in" is a word).) |
||
Line 10: | Line 10: | ||
=== Specifications === | === Specifications === | ||
CAPACITIES | CAPACITIES | ||
* Height of centres: 6½ in | * Height of centres: 6½ in. | ||
* Swing | * Swing | ||
:: Over bed: 13 in | :: Over bed: 13 in. | ||
:: Over cross slide: 8 in | :: Over cross slide: 8 in. | ||
* Distance between centres: 36 in | * Distance between centres: 36 in. | ||
* Diameter if faceplate: 12 in | * Diameter if faceplate: 12 in. | ||
* Turning diameter in gap: 18 in | * Turning diameter in gap: 18 in. | ||
* Width in front of faceplate: 4 | * Width in front of faceplate: 4{{Frac|3|8}} in. | ||
* Capacity of travelling steady rest: 2 in | * Capacity of travelling steady rest: 2 in. | ||
* Overall length: 77½ in | * Overall length: 77½ in. | ||
* Overall width: 33 in | * Overall width: 33 in. | ||
* Weight (approx): 1512 lb | * Weight (approx): 1512 lb | ||
HEADSTOCK | HEADSTOCK | ||
* Spindle bore (Max. bar diameter): 1½ in | * Spindle bore (Max. bar diameter): 1½ in. | ||
* Spindle nose: A.S.A. long taper LO | * Spindle nose: A.S.A. long taper LO | ||
* Taper in spindle nose bush: No. 3 Morse | * Taper in spindle nose bush: No. 3 Morse | ||
Line 29: | Line 29: | ||
* Range of spindle speeds (two-speed motor): 40–1800 r.p.m. | * Range of spindle speeds (two-speed motor): 40–1800 r.p.m. | ||
CARRIAGE | CARRIAGE | ||
* Total travel of cross slide: 6¾ in | * Total travel of cross slide: 6¾ in. | ||
* Total travel of top slide: 3 | * Total travel of top slide: 3{{Frac|5|8}} in. | ||
* Height from top of top slide to centre line of spindle: 1 | * Height from top of top slide to centre line of spindle: 1{{Frac|7|8}} in. | ||
* Max. tool shank size (pillar type tool post): | * Max. tool shank size (pillar type tool post): {{Frac|9|16}} × 1{{Frac|1|8}} in. | ||
THREADS AND FEEDS | THREADS AND FEEDS | ||
* Pitch of leadscrew: 6 t.p.i. | * Pitch of leadscrew: 6 t.p.i. | ||
Line 39: | Line 39: | ||
* Number of feeds: 45 | * Number of feeds: 45 | ||
::Range per rev. of spindle | ::Range per rev. of spindle | ||
::: | :::Longitudinal: 0.0025–0.068 in. | ||
:::Cross: 0.0006–0.017 in | :::Cross: 0.0006–0.017 in. | ||
TAILSTOCK | TAILSTOCK | ||
* Spindle travel (No. 3 M.T. centre fitted): 5½ in | * Spindle travel (No. 3 M.T. centre fitted): 5½ in. | ||
* Spindle travel (Standard tang drill fitted): 3¾ in | * Spindle travel (Standard tang drill fitted): 3¾ in. | ||
* | * Taper in spindle: No. 3 Morse | ||
DRIVE | DRIVE | ||
* Two-speed motor | * Two-speed motor | ||
Line 50: | Line 50: | ||
:: 60 c/s | :: 60 c/s | ||
:: 1800 / 900 r.p.m. | :: 1800 / 900 r.p.m. | ||
* ''Electrical spec: '' '''xxxV 60Hz yyyA zzzW''' | * ''Electrical spec: '' '''xxxV 60Hz yyyA zzzW''' |
Revision as of 18:14, 2 February 2021
Description
TBW
Classes
- Use of this machine will require a BOSS class, to be developed. Meanwhile use is restricted to approved staff and volunteers.
Specifications
CAPACITIES
- Height of centres: 6½ in.
- Swing
- Over bed: 13 in.
- Over cross slide: 8 in.
- Distance between centres: 36 in.
- Diameter if faceplate: 12 in.
- Turning diameter in gap: 18 in.
- Width in front of faceplate: 43⁄8 in.
- Capacity of travelling steady rest: 2 in.
- Overall length: 77½ in.
- Overall width: 33 in.
- Weight (approx): 1512 lb
HEADSTOCK
- Spindle bore (Max. bar diameter): 1½ in.
- Spindle nose: A.S.A. long taper LO
- Taper in spindle nose bush: No. 3 Morse
- Spindle speeds (two-speed motor): 16
- Range of spindle speeds (two-speed motor): 40–1800 r.p.m.
CARRIAGE
- Total travel of cross slide: 6¾ in.
- Total travel of top slide: 35⁄8 in.
- Height from top of top slide to centre line of spindle: 17⁄8 in.
- Max. tool shank size (pillar type tool post): 9⁄16 × 11⁄8 in.
THREADS AND FEEDS
- Pitch of leadscrew: 6 t.p.i.
- Number of threads: 45
- Range: 4–120 t.p.i.
- Number of feeds: 45
- Range per rev. of spindle
- Longitudinal: 0.0025–0.068 in.
- Cross: 0.0006–0.017 in.
- Range per rev. of spindle
TAILSTOCK
- Spindle travel (No. 3 M.T. centre fitted): 5½ in.
- Spindle travel (Standard tang drill fitted): 3¾ in.
- Taper in spindle: No. 3 Morse
DRIVE
- Two-speed motor
- 3 / 1½ hp
- 60 c/s
- 1800 / 900 r.p.m.
- Electrical spec: xxxV 60Hz yyyA zzzW
MN Asset Details
- Location: Metal Shop
- Model Number: Clausing-Colchester 6527
- Serial Number: F 3 59306
- Motor Serial Number: motorsn
- MN Asset Number: mnAN
Safety Specifics
All general MN Safety policies of course apply to use of this tool, as do safety policies for the containing shop area and safety practices prescribed in our classes and/or in detailed tool documentation, regardless of whether they're repeated here.
Documentation
Materials, Tooling, Accessories
TBW
Settings
TBW
Tips & Tricks
TBW
Back to MN-S_Metalshop Equipment List