3D printed Indirect Ophthalmoscope shields: Difference between revisions

From makernexuswiki
Jump to navigation Jump to search
Line 42: Line 42:


=== Laser Cut Parts ===
=== Laser Cut Parts ===
This shield has specific cut outs to mount on ophthalmologist head gear. File to be supplied shortly.


=== Elastic Bands ===
=== Elastic Bands ===

Revision as of 18:56, 12 May 2020

Opthamologist frames v11.png

Overview

3D Print Parts At Home

Use Your 3D Printer for good

Sign up

We are establishing a network of 3D printer owners who can make the headbands for us. You make them and deliver them to our facility where we do the assembly and get them to the hospitals. If you want to be part of our network, fill in this form and we will contact you:

I want to help make them

What to do with the finished product

When you have parts ready to deliver, please follow the following steps:

  1. Seal in plastic bag.
  2. Label bag with your email, the version of face shield you printed (e.g. "v11"), the material printed with and the date you closed the bag.
  3. Mail to
Maker Nexus
234 E. Caribbean Drive
Sunnyvale, CA 94089

OR Deliver to us if you are local and it does not violate the Shelter In Place Order - please do not make a special trip for this - but if you are passing by on your way to get essential groceries and want to drop it off, that is acceptable - there is a box outside our front door where donated parts can be placed.

Please be sure you are following proper sanitation procedures when you bag parts - if possible, wear gloves and a breathing mask, wipe or spray with disinfectant if available. We want to minimize the chance of cross-contamination. After it reaches MN, we will be further disinfecting them before delivering to its end destination.

We have some 1.75mm (and 2.85mm) PETg that we can give you when you have dropped off 100 or more shield parts. Just ring the door bell and ask if we have any filament in stock.

3D Print Directions

Materials

These need to be printed in PETg.

Instructions

Parts

File to print: Frames STL file

Laser Cut Parts

This shield has specific cut outs to mount on ophthalmologist head gear. File to be supplied shortly.

Elastic Bands