MN-S Laser Cutters

From makernexuswiki
Revision as of 23:09, 14 October 2021 by FredRadford (talk | contribs)
Jump to navigation Jump to search

Epilog Helix 45w

  • 45 Watt
  • 18" x 24" bed
  • vents to a filter. No MDF, leather, or other smokey/smelly materials.
  • on long term loan to MN

BossLaser LS2440 100w

  • 100 watt
  • 24" x 40" bed
    • BOSS physical working range: 24" x 39.0". Lightburn constraint (or maybe BOSS software): about 24"x36". Maximum sheet size that can be placed in the enclosure (overlapping the actual bed: bigger than 24" and bigger than 40", but not exactly sure and your positioning of a sheet that size requires planning.
  • vents to a filter. No MDF, leather, or other smokey/smelly materials.
  • based on testing by a member, the kerf is 0.004" or 0.1016mm
  • Using Lightburn at home
    • select "Ruida" for controller, "Serial/USB", name it, set appropriate bed dimensions (BossLaser is approximately X-axis 1016 mm, Y-axis 609.6 mm), set origin to "Rear Right".

The file capacity is 99 files. Once full, new files will not be accepted from the computer to the controller. You may delete files one-by-one or clear them all with Files -> Other -> Delete All Memory Files Class: BOSS 100W Laser Cutter, BossLaser LS2440 details

"Red" laser 100w

  • Chinese parts, no make or model.
  • 100 watt
  • bed size: 30" x 26"
  • vents to a filter. MDF, leather, other smokey/smelly materials are not allowed.

Thunder laser 100w

  • 100 watt
  • on long term loan to MN
  • ?" x ?"
  • not available to members yet.

Filters

4 BOFA HEPA filters

Air Compressors

tags for search

working area