Baby Lock Éspire Sewing Machine
Jump to navigation
Jump to search
Description
TBW
Classes
TBW
Specifications
- Electrical spec:
- 120V ~ 60Hz 1A
- LAMP MAX 12V 5W
MN Asset Details
Safety Specifics
All general MN Safety policies of course apply to use of this tool, as do safety policies for the containing shop area and safety practices prescribed in our classes and/or in detailed tool documentation, regardless of whether they're repeated here.
For any sewing machine:
- Keep your eye on the needle while sewing.
- Keep your fingers away from all moving parts. Do not touch handwheel, thread takeup levers, needles etc.
- Do not let anything obstruct the moving parts: foot pedals, levers, needles, etc.
- Use care when pushing or pulling fabric when sewing so you do not deflect the needle and cause it to break. Broken needles fly unpredictably and may travel long distances.
- Remove pins before the machine sews over them. They blunt or dull the needle and can causing timing problems.
- Make sure the needle isn't moving, is at it's highest point, and the take-up lever is up before you remove fabric to avoid needle deflection.
- Avoid loose clothing or long sleeves that might get caught in the work.
- If a needle becomes bent or breaks, report it.
- Turn off the power switch when:
- Operation is complete
- Replacing or removing the needle or presser foot
- Leaving the machine unattended
- Turn off the power switch and unplug the cord for these situations:
- Power failure during use
- Servicing the machine
All general MN Safety policies of course apply to use of this tool, as do safety policies for the containing shop area and safety practices prescribed in our classes and/or in detailed tool documentation, regardless of whether they're repeated here.
Documentation
Materials, Tooling, Accessories
TBW
Settings
TBW
Tips & Tricks
TBW
Back to MN-S_Textiles Equipment List